Choose the correct size of system for your needs

Spencer Machine and Tool now offers three different models of its Strainer Systems to match your filtration needs. To determine which model is needed, simply measure your production flow rate and pipe size to each chart below. *G.P.M. Maximum Flow Rate is determined by using clean water with 100 micron screen at 80 p.s.i. Note: Click on drawings to see larger versions.

 

2" Spencer Strainer System (GS-72-3)

GS-72-3
  • 2" Inlet and Outlet
  • 2" Drain
  • 150+ GPM Maximum Flow Rate
  • 316 Stainless Steel Construction
  • 1 Wiper Blade, (Bronze, Delrin or Peek)
  • Air or Electric Motor

4" Spencer Strainer System (GS-144)

GS-144
  • 4" Inlet and Outlet
  • 3" Drain
  • 500+ GPM Maximum Flow Rate
  • 316 Stainless Steel Construction
  • 2 Wiper Blades, (Bronze, Delrin or Peek)
  • Air or Electric Motor

8" Spencer Strainer System (GS-288)c

GS-288
  • 8" Inlet and Outlet
  • 4" Drain
  • 5000+ GPM Maximum Flow Rate
  • 316 Stainless Steel Construction
  • 2 Wiper Blades, (Bronze, Delrin or Peek)
  • Air or Electric Motor
SPECIFICATIONS (A.S.M.E. Code)
Maximum Temperature300 Degrees F
Maximum Inlet Pressure 400 P.S.I.
Maximum Differential Pressure300 P.S.I.

AVAILABLE RETENTIONS
Micron 25Mesh 500 Micron 175Mesh 80
Micron 50Mesh 270Micron 200Mesh 70
Micron 75Mesh 200Micron 225Mesh 68
Micron 100Mesh 135Micron 250Mesh 60
Micron 125Mesh 120Micron 375Mesh 43
Micron 150Mesh 100Micron 500Mesh 35
Filter Options:
Mobile Stand, Custom Made Screens, Automatic Purge System, Lease Purchase, Rental Units Available.